Written by Scott Wickham Saturday, 11 July 2009 19:29
Woods Monkey takes a quick look at a new offering from Spyderco--their Byrd Wings G-10 model. For those that are choosy about their edges, it gives you the best of both worlds.
My buddy had a real beater '69 Camaro. Three different colors, odd wheels, smelled a little funny, you know, a beater. But she had it where it counted and that was under the hood. Three hundred plus horses, headers, duals, fat four barrel Holley carb sitting on a polished Edelbrock intake. It was a screamer when you put your foot into it; she'd drop 2 gears, open up all 4 barrels and put you BACK in the seat! It was a sleeper and we made many chrome-laden rods look the fool. This new Byrd Wings knife from Spyderco is a sleeper too. Made in
Look closer and you'll see that someone had the forethought to drill all corners of this baby so you can put that nice stainless, logo'd, pocket clip wherever you want. That's important because you'll have to pick what your primary blade will be, the clip-point plain edge or the blunt tipped sheepfoot serrated. See, it has two full sized blades, one opens East, one West with your choice of blades. I always hear guys say they hate the half serrated blades, just give them a plain edge. I use a serrated blade every day at work so I like that type of knife personally, but this knife will give each person what they want. The blades are made of 8Cr13MoV and were razor sharp out of the box. I have yet to sharpen it so I can't really comment on stropping it back to shape yet, it just hasn't needed it. The Byrd Wings seems to have removable hardware so it can be taken apart and cleaned. There is an open spine to the design so a quick run under the faucet should be all that's needed except for in the most extreme cases. Closed length is 4.75" so it fills your pocket, especially since it has two 1/8" thick blades side by side in there, but it's not too bad.
If you have ever handled a Spyderco, you'll know that they have that great hole in the blade for one hand opening. The Byrd BY20 is similar but its hole resembles more of a bird's eye silhouette. What ever you think it looks like, it opens real easy. You can just roll that blade out, feel the liner lock pop into place and know you have a reliable tool at the ready. That goes for either blade too, they both feel the same, have that same great lock-up, and will cut what ever you point them at. I have had this knife on me since the BLADE show in May and it's been nothing but stellar. There is NO loosening of the blades, something I thought would happen with an inexpensive imported knife but it's really holding up well. And here's the best part: it retails for under $50! I found it online for about $32 and that is some serious value for this knife. There are lots of Byrd knives in the family, even a smaller non-locking version of this knife, and if this is any indication of the bang for the buck, I wouldn't hesitate to get one. Or two. The BY20 would make a really good B.O.B. knife if you wanted a folder. I avoid cheap knives like the plague but I have to say, this is an awesome little knife from over seas. Stainless everything, G-10 scales, dual blades, and quickly cleaned. The Byrd Wings BY20 is a real winner, and with a great price point to boot.
Visit: www.spyderco.com
Login Form
Recent Articles
- Bark River Knives Bravo Necker Review
- Benchmade 755 MPR Review
- KA-BAR/Johnson Adventure Potbelly Review
- iTP Light H01 CREE LED Headlamp Review
- Solkoa Fast-Fire Products Review
- A.M.K. Pocket Survival Pak Plus Available For Pre-order
- CRKT Eat'N Tool
- Survival Kit Containers--Old Meets New
- Making A Pocket Burner
- Magellan Explorist GC Review
- Kelty Supernova 3-IN-1 Review
- Altama Mountain Panamoc
- Brunton Restore Review
- Casio Pathfinder Watch Review
- SOG Knives PowerAssist Review